civil engineering free objective test
Free Online Civil Engineering Objective Questions
Practice Objective and Practice Questions for Civil Engineering
1. Consider the following statements :
Torsional restraint in a beam can be achieved by providing.
1. Web or Range cleats at the end connections
2. External support to the end of the compression Range
3, Bearing stiffness acting in conjunction with the bearing of the beam
Which of the above statements are correct?
(a) 1 only
(b) 1 and 2 only
(c) 2 and 3 only
(d) I, 2 and 3
Ans : d
2. Considering modular ratio as 13, grade of concrete as M20 and grade of steel as 415,
what is the ratio of balanced depth of neutral axis' as per working stress method to the
balanced depth of neutral axis as per limitstate method?
(a) 12/7
(b) 11/3
(c) 7/12
(d) I3/11
Ans : c
3. What is the anchorage value a standard hook of a reinforcement bar of diameter D?
(a) 4D
(b) 8D
(c) I2D
(d) I6D
Ans : d
4. How is the. base-level bending moment of a cantileverretaining wall expressed as a
function of its height H?
(a) H1
(b) H2
(c) H3
(d) H4
Ans : c
5. What is the adopted maximum spacing between vertical stirrups in an RCC beam of
rectangular corns-section having an effective depth of 300 mm?
(a)300 mm
(b) 275 mm
(c) 250 mm
(d) 225 mm
Ans : d
6. A power shovel is fitted with an engine of 150 f.w.h.p . It operates on full load for
6 minutes followed by 8 minutes for idling at one-third power. Its~hourly utilization is for
3 cycles What is its utilization factor?
(a) 0.398
(b) 0.433
(c) 0.467
(d) 0.528
Ans : b
7.A construction equipment has a useful life of 4 years after which it is to be replaced by a
new one. If the interest rate is 6%, what is the nearest value of the sinking fund factor?
(a) 0.023
(b) 0.23
(c) 0.17
(d) 0.31
Ans : b
8. Consider the following statements~ :
1. There is no large difference in speed between wheeled tractors and crawlers.
2. The operating cost of crawlers is generally more than for wheel d tractors.
3. Both wheeled tractors as well as crawlers, need to be .mounted on trailers. for long distance hauls.
4. Wheeled tractors may occasionally suffer slips whereas crawlers do not
Which of the above statements is/are NOTcorrect?
(a)1 only
b) 1 and 2
(c) 1 and 3
(d) 3 and 4
Ans : d
9 A 1.75 m3 capacity tractor loader has to forward loaded speed of 240 m/min, returning
unloaded speed of 300 m/ min and operates at 80% of the specified speed. It hauls earthmover
a distance of 60 m with fixed time per trip being 25 seconds. What is its effective cycle time?
(a) 54.25 seconds
(b) 55.50 seconds
(c) 56.75 seconds
(d) 58.75 seconds
Ans : d
Directoions .' Each of the next Six (06) items consists of two statements, one Labeled as the assertion
(A) and the other as ‘Reason (R). You are to examine these two statements carefully and select
the answers to these items using the codes given below :
Codes :
(a) Both A and R are individually true and R is the correct explanation of A
(b) Both A and R are individual true but R is not the correct explanation of A
(c) A is true but R is false
(d) A is false ,but R is true
10 Assertion (A) : The rate of hydration is faster in finer cements,
Reason (R) : the surface area of finer cement, is more in case of finer cement.
Ans : a
11.Assertion (A) : Strength of concrete is reduced due, to segregation
Reason (R) : Reducing the workability of concrete mix results in segregation.
Ans : c
12 Assertion (A). : The lower the difference between the minimum strength and the mean strength of a concrete mix, the lower the cement content to be used.
Reason (R) : The method for controlling the difference between the minimum strength and
the mean strength is quality control.
Ans : d
13.Assertion (A) : Shearing force may be defined as the rate of change of loading moment.~
Reason CR) : Shearing force at a section is the algebraic sum of the forces to the left of the section.
Ans : b
14. Assertion (A) : The provision of lateral reinforcement in RCC columns is not
mandatory.
Reason (R) : The lateral reinforcement in RCC columns helps in prevention possible bulking of longitudinal reinforcement
Ans : d
15.Assertion (A) : Method of moment distribution in classifiable as a force method
Reason (R) : The method consists computing end moments due to end rotation of the
member.
Ans : d
Free Online Civil Engineering Objective Questions
Practice Objective and Practice Questions for Civil Engineering
1. Consider the following statements :
Torsional restraint in a beam can be achieved by providing.
1. Web or Range cleats at the end connections
2. External support to the end of the compression Range
3, Bearing stiffness acting in conjunction with the bearing of the beam
Which of the above statements are correct?
(a) 1 only
(b) 1 and 2 only
(c) 2 and 3 only
(d) I, 2 and 3
Ans : d
2. Considering modular ratio as 13, grade of concrete as M20 and grade of steel as 415,
what is the ratio of balanced depth of neutral axis' as per working stress method to the
balanced depth of neutral axis as per limitstate method?
(a) 12/7
(b) 11/3
(c) 7/12
(d) I3/11
Ans : c
3. What is the anchorage value a standard hook of a reinforcement bar of diameter D?
(a) 4D
(b) 8D
(c) I2D
(d) I6D
Ans : d
4. How is the. base-level bending moment of a cantileverretaining wall expressed as a
function of its height H?
(a) H1
(b) H2
(c) H3
(d) H4
Ans : c
5. What is the adopted maximum spacing between vertical stirrups in an RCC beam of
rectangular corns-section having an effective depth of 300 mm?
(a)300 mm
(b) 275 mm
(c) 250 mm
(d) 225 mm
Ans : d
6. A power shovel is fitted with an engine of 150 f.w.h.p . It operates on full load for
6 minutes followed by 8 minutes for idling at one-third power. Its~hourly utilization is for
3 cycles What is its utilization factor?
(a) 0.398
(b) 0.433
(c) 0.467
(d) 0.528
Ans : b
7.A construction equipment has a useful life of 4 years after which it is to be replaced by a
new one. If the interest rate is 6%, what is the nearest value of the sinking fund factor?
(a) 0.023
(b) 0.23
(c) 0.17
(d) 0.31
Ans : b
8. Consider the following statements~ :
1. There is no large difference in speed between wheeled tractors and crawlers.
2. The operating cost of crawlers is generally more than for wheel d tractors.
3. Both wheeled tractors as well as crawlers, need to be .mounted on trailers. for long distance hauls.
4. Wheeled tractors may occasionally suffer slips whereas crawlers do not
Which of the above statements is/are NOTcorrect?
(a)1 only
b) 1 and 2
(c) 1 and 3
(d) 3 and 4
Ans : d
9 A 1.75 m3 capacity tractor loader has to forward loaded speed of 240 m/min, returning
unloaded speed of 300 m/ min and operates at 80% of the specified speed. It hauls earthmover
a distance of 60 m with fixed time per trip being 25 seconds. What is its effective cycle time?
(a) 54.25 seconds
(b) 55.50 seconds
(c) 56.75 seconds
(d) 58.75 seconds
Ans : d
Directoions .' Each of the next Six (06) items consists of two statements, one Labeled as the assertion
(A) and the other as ‘Reason (R). You are to examine these two statements carefully and select
the answers to these items using the codes given below :
Codes :
(a) Both A and R are individually true and R is the correct explanation of A
(b) Both A and R are individual true but R is not the correct explanation of A
(c) A is true but R is false
(d) A is false ,but R is true
10 Assertion (A) : The rate of hydration is faster in finer cements,
Reason (R) : the surface area of finer cement, is more in case of finer cement.
Ans : a
11.Assertion (A) : Strength of concrete is reduced due, to segregation
Reason (R) : Reducing the workability of concrete mix results in segregation.
Ans : c
12 Assertion (A). : The lower the difference between the minimum strength and the mean strength of a concrete mix, the lower the cement content to be used.
Reason (R) : The method for controlling the difference between the minimum strength and
the mean strength is quality control.
Ans : d
13.Assertion (A) : Shearing force may be defined as the rate of change of loading moment.~
Reason CR) : Shearing force at a section is the algebraic sum of the forces to the left of the section.
Ans : b
14. Assertion (A) : The provision of lateral reinforcement in RCC columns is not
mandatory.
Reason (R) : The lateral reinforcement in RCC columns helps in prevention possible bulking of longitudinal reinforcement
Ans : d
15.Assertion (A) : Method of moment distribution in classifiable as a force method
Reason (R) : The method consists computing end moments due to end rotation of the
member.
Ans : d